Alerts
Selected filters
Showing 13-24 of 50 results with 1 filter
- Relevance
- Title (A-Z)
- Title (Z-A)
- Date (Newest first)
- Date (Oldest first)
-
Incident alert
Worker sustained fatal injuries when tractor veered over an embankment and rolled
In March 2023, a worker sustained fatal crush injuries when the tractor he was operating veered off the path over an embankment and rolled. Early investigations indicate that the worker was not wearing a seat belt. For reasons yet to be established, the tractor has veered off the path over an embankment rolling over.
4 July 2023 -
Incident alert
Young worker seriously injured by drop saw
In April 2023, a young worker suffered serious hand injuries after an incident on a construction site. Early enquiries indicated the worker was operating a drop saw to cut noggins when for reasons yet to be established his hand came into contact with the moving blade, causing significant amputation injuries.
30 June 2023 -
Incident alert
Fatal incident involving semi-trailer tipper
In March 2023, a truck driver suffered fatal injuries after becoming trapped between the tipper body and chassis of a semi-trailer tipper combination. Early investigations indicated the truck driver appears to have been inspecting one of the tipper trailers at the time.
26 June 2023 -
Incident alert
Fatal fall from shed roof
In February 2023, a roofer was fatally injured when he fell over 5 metres from the roof of a shed under construction. Early investigations indicated he was installing roof sheeting on a portal framed shed when for reasons yet to be established, he lost his balance near the live leading edge and fell to the ground.
20 June 2023 -
Incident alert
Serious fire and explosion injuries in three hot work incidents
In October 2022, a worker suffered serious burns to his upper body after being engulfed by a fire at an engineering workplace. Early investigations revealed he was welding a metal plate to repair a leak to a tank, when an explosion occurred which resulted in a fire.
12 December 2022 -
Incident alert
Worker fatally crushed by skid steer loader
In February 2019, a worker was killed while repairing a skid steer loader. Early investigations indicate the safety prop was not engaged to ensure the bucket arms could not be lowered. The worker inadvertently activated the controls and was crushed by the arms. It appears the mechanisms which enable the hand controls to be isolated were inoperative due to general wear and tear on the machine. Investigations are continuing.
29 March 2019 -
Workplace health and safety alert
Vehicle loading cranes
VLCs can be dangerous when they are not operated in accordance with the manufacturers' instructions. The purpose of this safety alert is to alert operators of vehicle loading cranes (VLCs) of the need to follow the manufacturer¿s operating instructions and to provide safety guidance for owners and employers.
28 November 2018 -
Incident alert
Worker fatally crushed when forklift tipped over
In October 2018, a worker was killed when the forklift he was operating tipped over and pinned him. The experienced operator was moving a load into an industrial shed. The forklift’s mast collided with an overhead steel beam, causing the forklift to tip over onto its side pinning the operator. It appears the operator may not have been wearing a seat belt. Investigations are continuing.
14 November 2018 -
Incident alert
Worker killed in fall from air-conditioning duct
In August 2018, a worker was killed after falling twelve metres onto a concrete floor. Early investigations indicate he was undertaking scheduled maintenance of air-conditioning ducts and was in the fresh air intake pre-conditioned outside air (PCOA) unit. A co-worker returned to the area and found a void where a floor grate had been. He looked through the void and saw his colleague on the concrete floor below. This particular PCOA is the only vent open to external, often hot and humid air, and as such is a high corrosion area. Investigations are continuing.
6 September 2018 -
Workplace health and safety alert
Counterweights on mobile plant
The purpose of this safety alert is to: inform workers about the hazard of falling counterweights when fitting or removing them on mobile plant, and provide guidance on design, fitting, work system and training issues to reduce the risk of anyone being injured or killed by falling counterweights on mobile plant during their fitting or removal.
3 August 2018 -
Workplace health and safety alert
Ladder platform brackets
The purpose of this safety alert is to highlight the risks associated with attaching ladder platform brackets onto ladders.
3 August 2018 -
Workplace health and safety alert
Safe filling of portable aluminium alloy cylinders
The purpose of this alert is to inform all businesses and people who fill aluminium alloy cylinders of the risks of death and injury from cylinder explosion.
31 July 2018