Case studies
Selected filters
Showing 13-24 of 27 results with 2 filters
- Relevance
- Title (A-Z)
- Title (Z-A)
- Date (Newest first)
- Date (Oldest first)
-
Employers need to consider the health and safety of those at work outside of normal hours
In the recent judgement of Walker v Greenmountain Food Processing Pty Ltd [2020] QSC 329, the Supreme Court of Queensland found an employer liable for the loss and damage suffered by a worker who sustained serious injuries after falling through a roof at dusk while investigating an issue with a boiler.
2 March 2021 -
Accident not caused by failures
Wolters v The University of the Sunshine Coast [2012] QSC 298, 5 October 2012. This is another case where the legal term of causation has been examined. The court found the employer breached its duty at common law and in contract by failing to adequately manage the behaviour of the supervisor following the event with the previous worker. However, the court held that the breach did not cause the claimant's loss, as it could not find that any action by the employer would have prevented the supervisor's actions on the day.
1 July 2015 -
Young Worker Training Initiative - Mirvac Construction
Zero harm at Work Leadership Program case study - Mirvac Construction (Queensland) Pty Ltd and their approach to the needs of young workers including trainees and apprentices.
PDF 146.24 kB 28 August 2020 -
Return on investment: CB group
Over five years the return on investment for the CB Group investment in an upgraded WHS system is $3.22 of benefit for every $1 of cost.
PDF 123.83 kB 28 August 2020 -
ROI Rexel electrical case study
Over a five year period, the investment made by Rexel is estimated to provide a return on investment of around $1.82 of benefits for every $1 of expenditure.
PDF 123.37 kB 28 August 2020 -
The Scooter Group - a case study on restructuring safety
A case study highlighing a top performing business and their safety practices following the MSBI.
PDF 125.4 kB 28 August 2020 -
Manual task case study: Maintaining the internal lining of furnaces - Bradken
Case study about how Bradken applied the PErforM program to reduce the manual-tasks risks of maintaining the internal lining of furnaces.
PDF 117.75 kB 28 August 2020 -
Zero Harm at Work Leadership Program Watpac Limited case study
This case study outlines Watpac Limited's safety calendar and poster initiative.
PDF 201.67 kB 28 August 2020 -
Workplace health and wellbeing action plan: A case study
Action plan example. Use this as a guide to completing your own action plan.
DOC 167.94 kB 28 August 2020 -
IPAM films
These films showcase the Injury Prevention and Management program and highlight benefits for employers.
18 September 2019 -
Peter Gould Redland City Council case study
Case study on proactively integrating work health and wellbeing
PDF 794.56 kB 28 August 2020 -
Safety leadership and culture stories
Hear from safety leaders sharing their experience building and maintaining a positive safety culture in their workplace.
10 December 2019